Sierra 1500 2WD V6-4.3L VIN X (2004)
Engine Mount: Service and Repair
Right
Engine Mount Replacement - Right
Removal Procedure
Notice: Refer to Engine Mounting Notice in Service Precautions.
1. From under the hood, remove the engine mount to engine mount bracket bolts. (left side shown, right side similar).
2. Raise and suitably support the vehicle.
3. Remove the oil pan skid plate bolts and plate.
4. Using an adjustable jack on the square tab (left side shown) at the rear of the engine block, raise the engine. In order to access the square tab,
remove the starter. (left side shown, right side similar).
Notice:
Refer to Engine Lifting Notice in Service Precautions.