gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Evaporator Tube Replacement (Without RPO Code HP2)|Page 9648 > < Evaporator Tube Replacement (Without RPO Code HP2)|Page 9646
Page 2
background image

7. Remove the push pin from the right side radiator air baffle.
8. Remove the bolts (2) from the starter/generator control module (SGCM) coolant pump (1).
9. Reposition the SGCM coolant pump.

10. Remove the right park/turn signal lamp.
11. Remove the grille from the vehicle.
12. Remove the evaporator tube nut from the condenser.
13. Remove the evaporator tube from the condenser.

14. Remove the front evaporator tube from the vehicle.

Evaporator Tube Replacement (Without RPO Code HP2)|Page 9648 > < Evaporator Tube Replacement (Without RPO Code HP2)|Page 9646