Sierra 1500 2WD V6-4.3L VIN X (2004)
1. If installing the old CKP sensor, install a NEW O-ring seal.
IMPORTANT: Do not reuse the original O-ring seal.
2. Lubricate the O-ring seal with clean engine oil.
3. Install the CKP sensor.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the CKP sensor bolt.
Tighten
Tighten the bolt to 9 N.m (80 lb in).
5. Connect the CKP sensor electrical connector (5).