Sierra 1500 2WD V6-4.3L VIN X (2004)
5. Remove the MAF/IAT sensor.
INSTALLATION PROCEDURE
IMPORTANT: Ensure to point the arrow on the MAF/IAT sensor away from the air cleaner box.
1. Install the MAF/IAT sensor.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Tighten the MAF/IAT sensor clamp at the air cleaner box.
Tighten
Tighten the clamp to 4 N.m (35 lb in).
3. Install the air cleaner outlet duct to the MAF/IAT sensor.
4. Tighten the air cleaner outlet duct clamp at the MAF/IAT sensor.
Tighten
Tighten the clamp to 4 N.m (35 lb in).