Sierra 1500 2WD V8-4.8L (2007)
Fan Shroud: Service and Repair
Cooling Fan and Shroud Replacement
Cooling Fan and Shroud Replacement (Non-HP2)
Removal Procedure
1. Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) Cooling System Draining and Filling (Vac-N-Fill)
2. Remove air inlet duct.
3. Disconnect upper radiator hose from radiator.
4. Disengage the radiator inlet hose clip (2) at the fan shroud.
5. If necessary, reposition the surge tank inlet hose clamp at the radiator.
6. If necessary, remove the surge tank inlet hose from the radiator.