Sierra 1500 2WD V8-4.8L (2007)
11. Install the propeller shaft yoke retaining clamps and the bolts.
Tighten the bolts to 25 N.m (18 lb ft).
12. Inspect and add axle lubricant to the axle housing, if necessary.
13. Lower the vehicle.
GMC Workshop Service and Repair Manuals
Pinion Gear, Differential >
< Drive Pinion Flange/Yoke and/or Oil Seal Replacement (All Except 9.75 Inch Axle)|Page 14914
Page 5
