gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Front Door Window Motor > < A/T Controls - DTC P1825/P182E or P1915/MIL ON|Page 21816
Page 3
background image

2. Brush a small amount of lubricant on the entire length of both regulator rails. Refer to the illustration for lubricant location.
3. Cycle the door glass to verify that the noise is gone.
4. Reinstall the regulator following SI procedures.

Parts Information

Warranty Information

For vehicles repaired under warranty, use the table.

Disclaimer

Front Door Window Motor > < A/T Controls - DTC P1825/P182E or P1915/MIL ON|Page 21816