Sierra 1500 2WD V8-5.3L (2008)
1. Lubricate the valve lifters (209) and engine block valve lifter bores with clean engine oil.
2. Insert the valve lifters into the lifter guides (210). Align the flat area on the top of the lifter with the flat area in the lifter guide bore. Push the lifter
completely into the guide bore.
3. Install the valve lifters and guide (210) to the engine block.
Notice: Refer to Fastener Notice .
4. Install the valve lifter guide bolts.
Tighten the bolt to 12 N.m (106 lb in).
5. Install the cylinder head and gasket. Refer to Cylinder Head Replacement - Left Side (See: Cylinder Head Assembly/Service and Repair) or
Cylinder Head Replacement - Right Side (See: Cylinder Head Assembly/Service and Repair) .
Valve Lifter Replacement (LH6, LMG, LY5 and L76)
Valve Lifter Replacement (LH6, LMG, LY5 and L76)
Removal Procedure
