Sierra 1500 2WD V8-5.3L (2008)
Center Support: Service and Repair
Propeller Shaft Center Support Bearing Replacement
Special Tools
*
J 5590 Gear and Bearing Installer
*
J 25234 Gear and Bearing Installer
*
J 39477 Puller Kit
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the propeller shaft assembly. Refer to Two-Piece Propeller Shaft Replacement (See: Drive/Propeller Shaft/Service and Repair/Two-Piece
Propeller Shaft Replacement) .
3. Install the J 39477 (1) on the center bearing assembly (2).
4. Position the J 39477 (1) in a vise
5. Using the J 39477 (1), remove the center bearing assembly (2) from the propeller shaft.
Installation Procedure
