gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Rear Axle Shaft and/or Gasket Replacement|Page 15525 > < Rear Axle Shaft and/or Gasket Replacement|Page 15523

Sierra 1500 2WD V8-5.3L (2008)

Page 7
background image

11. Using the J 24427 installer  (2)  and the J 8092 handle  (1), install the inner bearing cup into the wheel hub.

12. Install the inner bearing.

Note:  Ensure the seal is fully seated in the hub bore.

13. Using the J 44420 installer  (2)  and the J 8092 handle  (1), install the new oil seal.
14. Apply a light coat of high melting point EP bearing lubricant to the axle housing spindle.

 

Rear Axle Shaft and/or Gasket Replacement|Page 15525 > < Rear Axle Shaft and/or Gasket Replacement|Page 15523