Sierra 1500 2WD V8-5.3L (2008)
Installation Procedure
1. Apply sealant GM P/N 12346004 (Canadian P/N 10953480), or equivalent to the oil drain and fill plug threads.
Notice: Refer to Component Fastener Tightening Notice .
2. Using J 36511 install the oil drain plug.
Tighten the plug to 30 N.m (22 lb ft).
3. Remove and drain the drain pan used to catch the used transmission fluid.
4. Fill the transmission to just below the bottom of the fill plug hole. Refer to Lubrication Specifications (See: Specifications/Fluid Type
Specifications/Tremec 5-Speed (TZ0) - Manual Transmission) .
