Sierra 1500 2WD V8-5.3L Hybrid (2004)
Hood Stop: Service and Repair
Hood Bumper Replacement
Removal Procedure
1. Remove the front hood bumper by turning the front hood bumper (1) out counterclockwise.
2. Remove the side hood bumper by sliding the side hood bumper (2) rearward and pulling up.
Installation Procedure
1. Install the side hood bumper by pushing down and sliding the side hood bumper (2) forward.
2. Install the front hood bumper (1) by turning the front hood bumper in clockwise until the hood closes flush with the fender.
