Sierra 1500 2WD V8-5.3L Hybrid (2004)
Drink Holders: Service and Repair
Cupholder Replacement (Pro)
Cupholder Replacement (Pro)
Removal Procedure
1. Insert a flat bladed tool between the cupholder and console in order to pry the cupholder assembly out.
2. Lift the cupholder assembly slightly in order to disconnect the electrical connectors.
3. Remove the cupholder from the console.
4. Remove the switches from the cupholder assembly.
5. Remove the screws retaining the beverage-mate to the cupholder.
6. Remove the beverage-mate.
Installation Procedure
1. Install the beverage-mate to the cupholder.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the retaining screws.
Tighten the retaining screws to 1.6 N.m (14 lb in).
3. Install the switches to the cupholder assembly.
4. Connect the wire connectors to the switches.
5. Install the cupholder assembly to the console by pressing downwards until fully seated.
