gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Procedures|Page 11411 > < Procedures|Page 11409
Page 3
background image

4. Connect the electrical connectors.
5. Install the front door trim panel.
6. If equipped with camper mirrors program the door module. Refer to Service Programming System (SPS) in Programming.

Switch Replacement - Door Lock and Side Window - Passenger

SWITCH REPLACEMENT - DOOR LOCK AND SIDE WINDOW - PASSENGER

REMOVAL PROCEDURE

1. Remove the front door trim panel.
2. Disconnect the electrical connectors.
3. Remove the screw that retains the switch panel bezel (1) from the front door panel.

4. Remove the switch panel bezel from the door panel using a flat-bladed tool.

Procedures|Page 11411 > < Procedures|Page 11409