gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABS Automated Bleed Procedure|Page 5981 > < ABS Automated Bleed Procedure|Page 5979
Page 2
background image

perform the following steps:
1. Inspect the brake system for external leaks. 
2. Pressure bleed the hydraulic brake system in order to purge any air that may still be trapped in the system.

22. Turn the ignition key ON, with the engine OFF. Check to see if the brake system warning lamp remains illuminated.

23. Important:

If the brake system warning lamp remains illuminated, DO NOT allow the vehicle to be driven until it is diagnosed and repaired.

If the brake system warning lamp remains illuminated, refer to Symptoms - Hydraulic Brakes.

ABS Automated Bleed Procedure|Page 5981 > < ABS Automated Bleed Procedure|Page 5979