Sierra 1500 2WD V8-5.3L Hybrid (2004)
5. Connect the park brake warning lamp connector.
6. Install the MID-bussed electrical center to the bracket.
7. Install the left side hinge pillar panel. Refer to Trim Panel Replacement - Hinge Pillar in Interior Trim.
8. Raise and support the vehicle. Refer Vehicle Lifting
9. For 15 series vehicles, install the park brake cable to the equalizer by pulling down on the park brake cable in front of the equalizer then installing
the cable to the equalizer bar.
10. For 25/35 series vehicles, enable the park brake cable automatic adjuster. Refer to Enabling the Park Brake Cable Automatic Adjuster.
11. Remove the safety stands and lower the vehicle.
12. Connect the negative battery cable.
