Sierra 1500 2WD V8-5.3L Hybrid (2004)
6. Remove the park brake cable from the park brake actuator lever.
7. Remove the wheel bearing. Refer to Wheel Hub and Bearing Replacement in Rear Wheel Steering See: Maintenance/Wheels and Tires/Wheel
Hub/Service and Repair.
8. Remove the park brake shoe from the backing plate.
Installation Procedure
1. Install the park brake shoe to the backing plate.
2. Install the wheel bearing. Refer to Wheel Hub and Bearing Replacement in Rear Wheel Steering See: Maintenance/Wheels and Tires/Wheel
Hub/Service and Repair.
3. Adjust the park brake shoe. Refer to Park Brake Adjustment in Park Brake See: Adjustments.
4. Install the park brake cable to the park brake actuator lever.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners
requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use
paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint
clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid
