Sierra 1500 2WD V8-5.3L Hybrid (2004)
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolt to the surge tank.
Tighten the bolt to 9 Nm (80 inch lbs.).
3. Install the nut to the surge tank.
Tighten the nut to 9 Nm (80 inch lbs.).
4. Install the surge tank outlet hose (2) to the surge tank.
5. Position the surge tank outlet hose clamp to the surge tank.
6. Install the surge tank inlet hose (1) to the surge tank.
7. Position the surge tank inlet hose clamp to the surge tank.
8. Connect the coolant level sensor electrical connector (3).
