gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Heater Hose Replacement - Inlet|Page 2925 > < Heater Hose Replacement - Inlet|Page 2923
Page 3
background image

5. Install the air cleaner outlet duct.
6. Install the radiator inlet hose clip to the outlet duct.

NOTE:  Refer to Fastener Notice in Service Precautions.

7. Tighten the air cleaner outlet duct clamps at the following locations:

-

Throttle body

-

MAF/IAT sensor

Tighten
Tighten the screws to 7 N.m (62 lb in).

8. Fill the cooling system. Refer to Draining and Filling Cooling System (with HP2)Draining and Filling Cooling System (without HP2) in Cooling

System.

Heater Hose Replacement - Inlet|Page 2925 > < Heater Hose Replacement - Inlet|Page 2923