Sierra 1500 2WD V8-5.3L Hybrid (2004)
3. If vehicle is a 2 wheel drive (2WD), raise the vehicle to a height to work through the front wheelhouse opening.
4. If vehicle is a 4 wheel drive (4WD), raise the vehicle in order to remove the front tires and wheels.
5. Remove the left front tire and wheel.
6. Remove the wheelhouse inner panel push pin retainers (2).
7. Remove the wheelhouse inner panel (1).
8. Remove the engine shield bolts.
9. Remove the engine shield.
Important: DO NOT raise and/or support the engine by the crankshaft balancer, or oil pan.
10. Raise and suitably support the engine using adjustable (screw type) jack stands.
11. Remove the engine mount bolts.
12. For vehicles with 4WD, remove the front propeller shaft.
13. Remove the left engine mount.
Installation Procedure
