Sierra 1500 2WD V8-5.3L Hybrid (2004)
4. Connect the low voltage cable electrical connector (1) on the driver side of the ESB.
5. Install the retaining clip (2) to ESB carrier.
6. Connect the 12-volt harness electrical connector on the passenger side.
7. Install the ground straps to the stud (2).
8. Install the ground strap nut (1).
Tighten
Tighten the nut to 10 N.m (89 lb in).
9. Connect the 120-volt AC electrical connector (3).
10. Connect the 42-volt positive/negative cable electrical connector (4).
11. Install the red CPA retainer to the 42-volt connector.
