Sierra 1500 2WD V8-5.3L Hybrid (2004)
When the maximum value is reached, the trip odometer will roll over to 0.0.
TIMER
The Timer is displayed as XX (hours) : XX (minutes) : XX (seconds).
The Timer is started and stopped using the DIC Select button.
Holding the Select button for longer than 1 second while the Timer parameter is displayed will reset the Timer to 00:00:00.
The Timer status and data value is retained in memory when the ignition is turned OFF. When the ignition is turned ON again, the Timer status and
data value is resumed.
The Timer maximum value is 99:59:59. When the maximum is reached, the Timer rolls over to 00:00:00 and continues to operate.
FUEL INFORMATION
DIC Fuel Information / Reset Capabilities
The available DIC Fuel Information and reset capabilities are as follows:
-
Range. Can not be reset
-
Avg. Fuel Economy. Can be reset
-
Inst. Fuel Economy. Can not be reset
-
Engine Oil Life. Can be reset
Range
The range display is the estimated distance that the vehicle can travel under current fuel economy and fuel level conditions.
This range is calculated from odometer information and class 2 messages.
Fuel Range is capable of displaying values from 0-999 mi or km.
Display appears as: RANGE: XXX MILES (English), RANGE: XXX km (Metric).
If the range is less than 40 miles, RANGE: LOW will be displayed.
Average Fuel Economy
The Average Fuel Economy (AFE) value is calculated by the cluster based on Trip Distance and Trip Fuel Used.
Pressing the Select button for longer than 1 second while the Average Fuel Economy is displayed in the DIC will reset to 0.0.
Average Fuel Economy is capable of displaying values from 0.0-99.9.
Display appears as: AVG ECON XX.X (English) MPG, AVG ECON XX.X L/100km (Metric).
Trip Distance and Trip Fuel Used accumulated values are stored in memory when the ignition is turned OFF.
Instantaneous Fuel Economy
Instantaneous Fuel Economy values are calculated by the cluster from odometer information and class 2 messages.
The cluster calculates instantaneous fuel economy based on distance and fuel.
Instantaneous fuel economy is capable of displaying values from 0.0 - 99.9.
Display appears as INST ECON XX.X (English), INST ECON XX.X L/100km (Metric).
Values for the Instantaneous fuel economy are not stored when the ignition is turned OFF.
Engine Oil Life
Engine Oil Life percentage values are based on class 2 messages to the IPC. The IPC requests this value when Engine Oil Life is selected on the DIC.
Engine Oil Life is capable of displaying values from 0-100 percent and the OIL LIFE RESET driver warning will be displayed.
Pressing the Select button for longer than 5 seconds while Engine Oil Life is displayed on the DIC the value will reset to 100 percent.
Display appears as ENGINE OIL LIFE: XXX%.
