Sierra 1500 2WD V8-5.3L Hybrid (2004)
2. Install the suction hose to the accumulator using new sealing washers.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the suction hose nut to the accumulator.
Tighten
Tighten the nut to 16 N.m (12 lb ft).
4. Install the suction hose (2) to the compressor using new sealing washers.
5. Install the suction hose mounting bolt to the A/C compressor.
Tighten
Tighten the bolt to 16 N.m (12 lb ft).
6. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
7. Leak test the fittings of the component using the J 39400-A.
