gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Throttle Position Sensor > < Heated Oxygen Sensor (HO2S) Replacement Bank 1 Sensor 1|Page 4157
Page 3
background image

3. If equipped with a 6.0L engine, connect the HO2S electrical connector.

4. If equipped with a 4.8L or 5.3L engine, connect the HO2S electrical connector.
5. Install the HO2S connector clip to the frame.
6. Disconnect the CPA retainer.
7. Lower the vehicle.

Throttle Position Sensor > < Heated Oxygen Sensor (HO2S) Replacement Bank 1 Sensor 1|Page 4157