Sierra 1500 2WD V8-5.3L Hybrid (2004)
Service Procedure
1.
Note the position of the rear seats.
2.
Position the seats to gain access to the lower seat belt anchor stud for the rear center seat.
3.
Remove any cover necessary to gain access to the lower seat belt anchor point for the rear center seat.
4.
Remove the nut (1) retaining the rear center seat's lower seat belt anchor (seat back shown in the up position).
5.
Remove the belt anchor point from the stud.
6.
Remove the belt from the seat loop on the front of the seat back cushion.
7.
Route the belt outside of the seat loop and install it on the lower anchor stud. Be sure that the belt is not twisted.
8.
Install the retaining nut to the anchor stud.
Tighten
Tighten the retaining nut to 53 Nm (39 lb ft).
9.
Using an appropriate color of locally obtained upholstery thread and needle (size 16 recommended), sew the retaining loop closed in the center.
10.
Reposition the seats to the customer's original position as noted in Step 1
Courtesy Transportation -- for US and Canada
The General Motors Courtesy Transportation Program is intended to minimize customer inconvenience when a vehicle requires a repair that is covered
by the New Vehicle Limited Warranty. The availability of courtesy transportation to customers whose vehicles are within the warranty coverage period
and involved in a product recall is very important in maintaining customer satisfaction. Dealers are to ensure that these customers understand that shuttle
service or some other form of courtesy transportation is available and will be provided at no charge. Dealers should refer to the General Motors Service
