Sierra 1500 2WD V8-5.3L Hybrid (2004)
Installation Procedure
1. Install the door module into the switch panel bezel until it snaps into place.
2. Install the switch panel bezel and module to the door panel.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the screw that retains the switch panel bezel (1) to the front door panel.
Tighten the screw to 2 N.m (18 lb in).
4. Connect the electrical connectors.
5. Install the front door trim panel.
6. If equipped with camper mirrors program the door module. Refer to Service Programming System (SPS) in Programming. See: Testing and
Inspection/Programming and Relearning
Switch Replacement - Door Lock and Side Window - Passenger
