Sierra 1500 2WD V8-5.3L Hybrid (2004)
3. Install the electrical wiring harness clip (4) to the bracket.
4. Notice:
Refer to Fastener Notice in Service Precautions.
Install the bolt retaining the wiring harness bracket (3) to the engine block.
^
Tighten the bolt retaining the ground to the engine block to 9 Nm (80 inch lbs.).
5. Connect the electrical connectors (2) to the wiring harness.
6. Install the coolant surge tank to the vehicle.
7. Connect the energy storage box after servicing the vehicle.