Sierra 1500 2WD V8-5.3L Hybrid (2004)
7. Install the lower control arm 25/35-series bolts.
8. Install the lower control arm nuts and the 25/35-series washers.
^
Tighten the nuts to 175 Nm (129 ft. lbs.).
9. For vehicles with recirculating ball steering, install the torsion bar. Refer to Torsion Bar Replacement.
10. Install the front stabilizer shaft link. Refer to Stabilizer Shaft Replacement.
11. Install the shock absorber. Refer to Shock Absorber Replacement (4WD) Shock Absorber Replacement (RWD).
12. Install the tire and wheel.
13. Remove the safety stands.
14. Lower the vehicle.
15. Verify the wheel alignment. Refer to Measuring Wheel Alignment (w/Rear Wheel Steering) Measuring Wheel Alignment (w/o Rear Wheel
Steering) in Wheel Alignment.
