Sierra 1500 2WD V8-5.3L VIN B HO (2006)
6. Measure from the mounting lugs to the transmission mounting face.
Important: The distance from the torque converter mounting lugs to the transmission mounting face is an important measurement. It is required to
check correct reassembly of the torque converter.
7. Install J 46409 180 degrees apart into 2 lugs on the front of the torque converter.
8. Lift the torque converter free of the transmission and place it on the work table.
Caution: Avoid personal injury or property damage when removing or installing the torque converter by seeking an assistant to help lift the torque
converter.
9. Remove the lifting handles.
Installation Procedure
1. Lubricate the converter pump hub OD and the torque converter seal with clean transmission fluid.
