Sierra 1500 2WD V8-5.3L VIN T (2005)
21. Raise the front drive axle into position.
22. If equipped with 4WD, install the differential carrier upper mounting bolt and nut until snug. Do not tighten at this time.
23. If equipped with 4WD, instal the differential carrier lower mounting bolt and nut.
Tighten the bolts to 100 Nm (75 ft. lbs.).
24. If equipped with 4WD, install the inner axle housing washers and nuts to the bracket.
Tighten the nuts to 100 Nm (75 ft. lbs.).
25. Remove the jack from the front drive axle.
26. Install new engine oil and a new oil filter.
