Sierra 1500 2WD V8-5.3L VIN Z Flex Fuel (2006)
3. Install the rear cables to the mounting bracket by inserting the cable till all the retaining tabs snap into place.
4. Connect the rear cables to the equalizer.
5. Tighten the nut to the intermediate cable at the equalizer.
Tighten the nut to 3.5 Nm (31 inch lbs.).
6. Remove the safety stands.
7. Lower the vehicle.
Guide Replacement
Park Brake Cable Guide Replacement
Removal Procedure
1. Release the parking brake.
2. Raise and support the vehicle.
3. Remove the park brake cable guide bolt from the frame.
4. Remove the park brake cable guide.
5. Remove the park brake guide from the park brake cable.
Installation Procedure
1. Install the park brake cable guide to the park brake cable.
2. Install the park brake cable guide.