Sierra 1500 2WD V8-5.3L VIN Z Flex Fuel (2006)
Transmission Cooler: Service and Repair
Allison - Automatic Transmission
Transmission Fluid Cooler Connector Replacement
Transmission Fluid Cooler Connector Replacement
Removal Procedure
1. Disconnect the hose from the transmission oil cooler pipe connector being replaced.
2. Remove the transmission oil cooler pipe connectors (1) and (2).
Installation Procedure
1. Install new transmission oil cooler pipe connectors (1) and (2).
^
Tighten to 25 Nm (18 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
2. Connect the hose to the transmission oil cooler pipe connectors.
Transmission Fluid Auxiliary Cooler Replacement
Transmission Fluid Auxiliary Cooler Replacement
Removal Procedure
