Sierra 1500 2WD V8-5.3L VIN Z Flex Fuel (2006)
Shift Boot: Service and Repair
NV 3500 - Manual Transmission
Control Lever and/or Boot Replacement
Removal Procedure
1. Remove the control lever.
Important: DO NOT move the shift lever assembly adjustment nut if replacing the control lever.
2. Remove the control lever boot retainer plastic retainers, if necessary.
3. Remove the control lever boot retainer, if necessary.
4. Remove the control lever boot screws, if necessary.
5. Remove the control lever boot, if necessary.
6. Remove the control lever insulator, if necessary.
Installation Procedure