Sierra 1500 2WD V8-6.0L Hybrid (2010)
1. Connect the right park brake cable eye (3) to the park brake actuator lever (2).
2. Install the park brake cable to the rear axle bracket by pulling the cable conduit (1) rearward to compress the spring and inserting the cable conduit
into the rear axle bracket.
3. Connect the park brake cable (1) to the rear axle housing cover clip.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the park brake cable clip bolt (2) and tighten to 22 Nm (16 lb ft).
