gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Idler Pulley > < Engine Mount Replacement - Left Side|Page 2842
Page 5
background image

Tighten the bolts to 90 Nm (67 lb ft).

8. If the vehicle is equipped with 4WD, Install the front drive axle. Refer to Differential Carrier Assembly Replacement (1500 FWD)   (See:

Transmission and Drivetrain/Differential Assembly/Service and Repair)Differential Carrier Assembly Replacement (2500 4WD)   (See:
Transmission and Drivetrain/Differential Assembly/Service and Repair).

9. Install the exhaust manifold. Refer to Exhaust Manifold Replacement - Right Side (V8)   (See: Exhaust System/Exhaust Manifold/Service and

Repair)Exhaust Manifold Replacement - Right Side (6.6L)   (See: Exhaust System/Exhaust Manifold/Service and Repair)Exhaust Manifold
Replacement - Right Side (V6)   (See: Exhaust System/Exhaust Manifold/Service and Repair).

Idler Pulley > < Engine Mount Replacement - Left Side|Page 2842