Sierra 1500 2WD V8-6.0L Hybrid (2010)
Oil Cooler: Service and Repair
Engine Oil Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
Engine Oil Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
Special Tools
*
DT-47731 1/2 in Line Quick Release Tool
*
J 28585 Universal Snap Ring Remover for the 5/8 in Line
Removal Procedure
1. Remove the plastic caps from the quick connect fittings by pulling the caps back along the pipe before installation.
2. Install the DT-47731 onto the engine oil cooler (EOC) pipe, or use the J 28585
3. Slide the DT-47731 toward the EOC pipe fitting, or use the J 28585