Sierra 1500 2WD V8-6.0L Hybrid (2010)
7. Position the transmission support crossmember.
8. Install the transmission support crossmember bolts and tighten to 95 Nm (70 lb ft).
9. Using the transmission jack, lower the transmission onto the transmission support.
10. Install the transmission mount to transmission support nuts and tighten to 40 Nm (30 lb ft).
11. Remove the support from the transmission.
12. Install the HO2S. Refer to Heated Oxygen Sensor Replacement - Bank 2 Sensor 1 (2500 Series - Cab/Chassis) (See: Powertrain
Management/Computers and Control Systems/Oxygen Sensor/Service and Repair)Heated Oxygen Sensor Replacement - Bank 2 Sensor 1 (2500
Series) (See: Powertrain Management/Computers and Control Systems/Oxygen Sensor/Service and Repair)Heated Oxygen Sensor Replacement -
Bank 2 Sensor 1 (1500 Series) (See: Powertrain Management/Computers and Control Systems/Oxygen Sensor/Service and Repair).
