Sierra 1500 2WD V8-6.0L Hybrid (2010)
2. Position and connect the EVAP rear pipe quick connect fittings to the rollover valve and the fuel tank module. Refer to Plastic Collar Quick
Connect Fitting Service (See: Fuel Delivery and Air Induction/Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting
Service).
3. Install the EVAP rear pipe to the fuel tank clips (1 and 2).
4. Install the EVAP canister purge pipe to the fuel tank clip (1).
5. Install the fuel tank. Refer to Fuel Tank Replacement (See: Fuel Delivery and Air Induction/Fuel Tank/Service and Repair/Removal and
Replacement).
