Sierra 1500 2WD V8-6.0L Hybrid (2010)
5. Install the axle shaft seal using the J-21128 - Axle Pinion Oil Seal Installer.
6. Drive the tool into the bore until the axle shaft seal bottoms flush with the tube.
7. Install the axle shaft. Refer to Rear Axle Shaft Replacement (See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft
Assembly/Axle Shaft/Service and Repair).
8. Install the rear axle housing cover. Refer to Rear Axle Housing Cover and Gasket Replacement (8.6, 9.5 Inch Axles) ()Rear Axle Housing Cover
and Gasket Replacement (10.5/11.5 Inch Axle) ().
9. Install the rear wheel speed sensor. Refer to Rear Wheel Speed Sensor Replacement (See: Non-Hybrid Less than 3900 kg (8600 lb) GVW).
10. Install the tire and wheel assembly.
11. Fill the rear axle. Refer to Differential Oil Replacement (10.5 Inch Axle) (See: Maintenance/Fluids/Fluid - Differential/Service and
Repair/Removal and Replacement)Differential Oil Replacement (11.5 Inch Axle) (See: Maintenance/Fluids/Fluid - Differential/Service and
Repair/Removal and Replacement)Differential Oil Replacement (8.6 Inch Axle) (See: Maintenance/Fluids/Fluid - Differential/Service and
Repair/Removal and Replacement)Differential Oil Replacement (9.5LD Inch Axle) (See: Maintenance/Fluids/Fluid - Differential/Service and
Repair/Removal and Replacement).
12. Lower the vehicle.
