Sierra 1500 2WD V8-6.0L Hybrid (2010)
Brake Light Switch: Service and Repair
Stop Lamp Switch Replacement (With Adjustable Pedals)
Stop Lamp Switch Replacement (With Adjustable Pedals)
Removal Procedure
1. Apply the park brake.
2. Remove the driver knee bolster. Refer to Knee Bolster Replacement (With SLT) (See: Restraint Systems/Knee Diverter/Service and Repair/Knee
Bolster Replacement (With SLT))Knee Bolster Replacement (Without SLT) (See: Restraint Systems/Knee Diverter/Service and Repair/Knee
Bolster Replacement (Without SLT)).
3. Disconnect the stoplamp switch electrical connector.
4. Remove the power vacuum brake booster pushrod retainer bolt (1).
5. Remove the power vacuum brake booster pushrod retainer (1).
