Sierra 1500 2WD V8-6.0L Hybrid (2010)
4. Remove the MAF/IAT sensor from the air cleaner assembly.
Installation Procedure
Note: The embossed arrow on the MAF/IAT sensor indicates the proper air flow direction. The arrow must point toward the engine.
1. Install the MAF/IAT sensor to the air cleaner assembly.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Tighten the MAF/IAT sensor adapter clamp to 4 Nm (35 lb in).
3. Connect the engine wiring harness electrical connector (2) to the MAF/IAT sensor (1).
4. Install the air cleaner outlet resonator. Refer to Air Cleaner Resonator Outlet Duct Replacement (See: Engine, Cooling and
Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair).