Sierra 1500 2WD V8-6.0L Hybrid (2010)
7. Install the starter solenoid cable terminal (2) to the fuse stud.
8. Install the starter solenoid cable nut (1) to the fuse stud.
Tighten the nut to 15 Nm (11 lb ft).
9. Install the mega fuse cover (3).
10. Connect the auxiliary battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (Single Battery) (See:
Battery/Battery Cable/Negative/Service and Repair)Battery Negative Cable Disconnection and Connection (Dual Batteries) (See: Battery/Battery
Cable/Negative/Service and Repair)Battery Negative Cable Disconnection and Connection (Auxiliary Battery) (See: Battery/Battery
Cable/Negative/Service and Repair).
175 Amp Mega Fuse Replacement (Single Battery)
175 Amp Mega Fuse Replacement (Single Battery)
