Sierra 1500 2WD V8-6.0L Hybrid (2010)
5. Install the range selector lever cable heat shield (2).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
6. Install the range selector lever cable heat shield bolts (1) and tighten to 17 Nm (13 lb ft).
7. Install the clips on the cable to the floor panel reinforcement.
8. Lower the vehicle and ensure that the steering column shift lever is still in the park position.
9. Install the cable grommet to the floor panel.