Sierra 1500 2WD V8-6.0L Hybrid (2010)
Flex Plate: Service and Repair
Engine Flywheel Replacement
Engine Flywheel Replacement
Removal Procedure
1. Remove the automatic transmission. Refer to Transmission Replacement (See: Automatic Transmission/Transaxle/Service and Repair).
2. Remove the flywheel bolts.
3. Remove the flywheel (1 or 2).
4. Clean and inspect the flywheel, if necessary.
Installation Procedure
Note: Flywheel weights of the same length must be installed into the NEW flywheel in the same location as the old weights were in the old
flywheel.
1. Note the position of the old flywheel weights and install the NEW flywheel weights as required.
A properly installed flywheel weight will be flush or slightly below flush with the face of the flywheel.