Sierra 1500 2WD V8-6.0L VIN U (2004)
6. Remove the caps from the fuel and EVAP lines.
7. Connect the fuel and EVAP quick connect fittings.
8. If equipped with 4WD, install the fuel line clip to the bracket on the transfer case.
9. Install the fuel line clips to the brackets on the transmission.
10. Install the fuel pipe bracket to the bellhousing stud.
11. Install the fuel pipe bracket nut.
Tighten
Tighten the nut to 10 N.m (89 lb in).
12. Lower the vehicle.
