Sierra 1500 4WD V6-4.3L (2008)
Radiator Cooling Fan Motor: Service and Repair
Engine Coolant Fan Motor Replacement (Non-HP2)
Removal Procedure
1. Remove the cooling blade(s). Refer to Engine Cooling Fan Replacement (Non-HP2) (See: Service and Repair) .
2. Remove the cooling fan motor bolts.
3. Remove the cooling fan motor(s).
Installation Procedure
1. Install the cooling fan motor(s).
Notice: Refer to Fastener Notice .
2. Install the cooling fan motor bolts.
Tighten the bolts to 10 N.m (89 lb in).
3. Install the cooling fan blades. Refer to Engine Cooling Fan Replacement (Non-HP2) (See: Service and Repair) .
