Sierra 1500 4WD V6-4.3L (2008)
2. Slide the EVAP canister vent solenoid onto the bracket towards the rear of the vehicle.
3. Ensure that the retainer (1) is engaged, securing the EVAP canister vent solenoid.
4. Connect the EVAP vent solenoid pipe quick connect fitting (3) to the EVAP canister.
5. Connect the chassis wiring harness electrical connector to the EVAP canister vent solenoid.
6. Install EVAP canister vent solenoid clip (1) to the chassis EVAP line.
7. Install the EVAP canister vent solenoid pipe to the clip (2) on the chassis EVAP line.
8. Install the EVAP canister vent solenoid pipe to the clips (3) on the brake pipes.
9. Lower the vehicle.
