gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Wiring Harness, A/T|Component Information > < Electrical - Electrical Malfunction/Multiple DTCs|Page 14798

Sierra 1500 4WD V6-4.3L (2008)

Page 3
background image

Important:  Do not reuse the old idler arm nut.

4. Install the new idler arm nut (3) to the idler arm (1).

Tighten the nut to 62 N.m (46 lb ft).

5. Install the engine shield, if equipped. Refer to Engine Shield Replacement   .
6. Adjust the front toe. Refer to Front Toe Adjustment  (See: Alignment/Service and Repair/Front Toe Adjustment) .

Wiring Harness, A/T|Component Information > < Electrical - Electrical Malfunction/Multiple DTCs|Page 14798