Sierra 1500 4WD V8-4.8L (2007)
Parking Brake Rear Cable Replacement - Right Side (JH6, JH7)
Removal Procedure
1. Release the park brake.
2. Disable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Disabling.
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
4. Disconnect the right park brake cable from the equalizer (1).
5. Release the right park brake cable from the frame bracket by compressing the locking tabs on the cable conduit (2) and pulling the cable rearward.
6. Release the park brake cable (1) from the rear axle housing cover clip.
7. Remove the park brake cable clip bolt (2).