Sierra 1500 4WD V8-4.8L (2007)
Turn Signal Switch: Service and Repair
Turn Signal Switch Cancel Cam Position Plate Replacement
Turn Signal Switch Cancel Cam Position Plate Replacement
Tools Required
*
J 23653-SIR Steering Column Lock Plate Compressor
*
J 42137 Cam Orientation Plate Adapter
Removal Procedure
1. Remove the inflatable restraint steering wheel module coil and the inflatable restraint steering wheel module coil wave washer.
Important: DISCARD the old steering shaft lock plate ring.
2. Remove the following parts from the steering shaft:
1. Steering shaft lock plate retaining ring (1) using compressor J 23653-SIR and adapter J 42137.
2. Turn signal switch cancel cam position plate (2)
3. Turn signal switch cancel cam (3)
Installation Procedure